Ridge cap metal tile forming machine, tile roll forming machine, ridge cap machine
Features:
There are not so many differences between these two kinds of roof ridge cap roll forming machines, except for different roller stations, different rolling tools, and what really makes different is hydraulic Pressing equipment which makes continuous STEPs on roof ridge caps.
Quick Detail:
- Thickness : 0.4-0.6mm
- Material : pre-painted steel
- Input width :310mm
- Cover width : 172 mm
- Material weight : 3MT
- Coil inner diameter : 480mm
- Driven way: by driven motor
- Cutting way: no waste cut, stop to press, stop to cut
- Cutting tolerance : ±1mm
Machine list:
- 3T*600mm hydraulic un-coiler
- Roll former
- Hydraulic cutting device
- Run out rack
- PLC control system
Description/Technical Parameter details of complete line:
- 3TX600mm Hydraulic Un-Coiler
Hydraulic system for expansion coil-inner-hole with 4 palms
Pump power=1.5KW
Load capacity=3 Ton
Coil Inner – diameter =451-530 mm
Coiler Width=Max. 600 mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Color steel sheet |
| Thickness | 0.4mm-0.6mm |
| Strip width | 310mm |
| Carriage Frame design | Wall-plate-frame-design |
| Roll forming stations | 18 stages |
| Roller material | 45# steel, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 7.5Kw with reducer |
| Rolling speed of roll former | 12-15m/min |
| Hydraulic group power | 11 Kw |
| Material of cutting blade | Cr12, hear treatment |
| Electric Voltage Standard | 380V/50Hz/3PH or as requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as requirements |
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Brief Introduction:
There are different roof flashing roll forming machines based on different technical requirements on the final products, however, in the market people most of time use three kinds of roof ridge cap roll forming machines. Roof ridge caps with pressed STEPs, Roof ridge cap without steps, and V shaped roof flashing without STEPs. It has to be pointed out that a roof ridge caps without STEPS sometimes can be used both as roof ridge caps and as roof valley flashings. In addition, there is a similar machine, Glazed Tile Roll Forming Machine.
This roof ridge caps without pressed steps design
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
High Production Metal Tile Forming Machine , Ridge Cap Machine CE Certificate Images
|
